|
This page shows the fit-out of the Master Bathroom on our
barge Elessina. Elessina was built
by Piper Boats at Stoke on Trent to a sailaway plus level, we
are completing the fit-out on our mooring at Port Medway on
the River Medway in Kent. Elessina is 60 ft long x
12'-6" wide has a 12mm thick 5ft wide flat bottom with
8/10mm thick angled side chines.
The bathroom is
approx 5ft x 8ft, located between the master bedroom and
saloon. |
Main bathroom
shower tray in place. The waste outlet fell directly over a
steel cross frame, so the whole unit and already installed
side panel had to be moved back 2".
|
Shower tray with
sea cock and toilet tank fitting in right side corner. The
shower tray and enclosure is from Novellini, it is a 1000 x
800 quadrant enclosure.
|
|
Sea cock and toilet
tank
fitting now inside
a cabinet. |
Another view of the
vanity unit and cabinet.
They are B&Q
kitchen wall unit carcases. |
|
Main bathroom, with
vanity units, work top and shower tray in place. The basin
will be installed on the left side. Toilet on the right.
|
Bathroom
vanity units in place, with basin cut out ready for basin to
be fitted |
|
|
Bathroom,
now with baisn and Sanimarine toilet in place. Neither basin
or loo are connected yet. |
 
Top left shows 1st
two 'tongue and groove'
upvc facia panels
in place (black marble
effect), then all
panels. |
|
|
View from bathroom
entrance door
|
View
from above toilet / window.. |
December 2005 - Now
carpeted with shower fully plumbed in to hot and cold water, with waste
connected to a small pump out system (because the tray is lower than water
level). Toilet is connected via a 3-way valve to sea or tank. |
|
 |
Main work
outstanding in the bathroom:-
All Finished!!! |
|
| <<<
Bedroom Fit-Out
Home
>>>
Next Page Elessina
Saloon Fit-out |